DW Series Belt Dryer bulk production of continuous drying equipment for breathability better flake, line, dry granular materials, dehydrated vegetables, Chinese Herbal Medicine, and other types of high moisture content, and the material does not allow high-temperature materials is particularly suitable; The series dryer with fast-drying, evaporation high strength, good product quality advantages of dehydration cake kind of a pasty consistency materials required by granulation or can be made after drying strip.
Hopper from the feed material for uniformity of the net onto the floor, using nets with 12 -60 head stainless steel screen, Gearing Drive from the dryer within the movement. Drying of a number of modules, each module independent hot air circulating, some of which are specialized removing humidity from the exhaust fan emits Each unit has gas emission control valve control. In the last cycle units, fan out from the side of the Wind Wind Road, unit under the cavity, flow upward through the heat exchanger, and with the splitter distribution. Jet stream into blowing network, through the material entered the chamber. Hot air drying process is material flow through the layer, the heat and quality completion of the process to convey. Superior vena by duct connected with the fan importers, the majority of air-circulation, Temperature lower part of a larger volume of wet gas emissions by as cure control, regulating valves, fans jump wetlands discharge. Under cycle units, fan out the wind first entered the chamber, down by the heat exchanger, through layers of materials into the next cavity. Inferior vena by side winds Road and return air duct connected with the fan importers, the majority of gas cycle, part of the discharge. The next cycle of modules based on user needs with flexibility, the number of modules can be selected according to need.
For dehydrated vegetables, three general use equipment used in series to form the beginning of the dry, and finally the middle of the paragraph. In the beginning of the dry, because moisture content of materials, poor ventilation, the use of small shops material thickness, faster speed and higher drying temperatures. Temperature does not allow for more than 60 ℃ expected, the beginning of the dry, dry gas temperature can be as high as 120 ° C, end of the stem within the residence time is the beginning of the dry 3 -6 times, resurfacing material thickness of the stem is the early 2-4 times. Materials for a temperature not exceeding 60 ° C, 80 ° C available about the drying gas. Multi-play combination of belt-drying properties, and more uniform drying.
|
Model |
DW-1.2-8 |
DW-1.2-10 |
DW-1.6-8 |
DW-1.6-10 |
DW-2-8 |
DW-2-10 |
|
Number of units |
4 |
5 |
4 |
5 |
4 |
5 |
|
Bandwidth m |
1.2 |
1.6 |
2 |
|
Drying long m |
8 |
10 |
8 |
10 |
8 |
10 |
|
Shop thick material mm |
10-80 |
|
Temperature oC |
50-120 |
|
Steam pressure Mpa |
0.2-0.5 |
|
Steam consumption Kg/h |
120-130 |
150-375 |
150-375 |
170-470 |
180-500 |
225-600 |
|
Heat transfer area m2 |
272 |
340 |
352 |
440 |
448 |
560 |
|
Drying time h |
0.2-1.2 |
0.25-1.5 |
0.2-1.2 |
0.25-1.5 |
0.2-1.2 |
0.2-1.5 |
|
Dry Strength Kg水/h |
60-160 |
80-220 |
75-220 |
95-250 |
100-260 |
120-300 |
|
Fan quantity |
5 |
6 |
5 |
6 |
5 |
6 |
|
Total power within the machine Kw |
9.9 |
12.1 |
9.9 |
12.1 |
18.2 |
22.2 |
|
Power equipment KW |
11.4 |
13.6 |
11.4 |
13.6 |
19.7 |
23.7 |
|
Dimensions |
long m |
9.77 |
11.77 |
9.77 |
11.7 |
9.77 |
11.77 |
|
Width m |
1.5 |
1.5 |
2.24 |
2.24 |
2.66 |
2.66 |
|
High m |
2.83 |
2.83 |
2.83 |
2.83 |
3.50 |
3.50 |
|
Weight Kg |
4800 |
5780 |
5400 |
6550 |
6350 |
7800 | |
