SZG bipyramid Rotary Vacuum Dryer host to a dual conical tanks shell in a vacuum, folder comprising can gain access to domestic hot water or steam for processing, the heat transfer through the bottle to wet materials. wetlands gasification waste water, low-speed rotary motor tank, material continuously from top to bottom, inside and outside banging, the replacement of the heating surface, and water vapor through a vacuum pipe constantly being drained away and accelerating the rate of drying materials, and eventually achieve uniform drying purposes.
1.Because it is in a vacuum drying, low temperature higher rate than the average speed drying equipment two times, economical, Thermal energy utilization is high, particularly suitable for heat-sensitive materials easy oxide material drying.
2. Closed dry, without leakage products, pollution, for a strong boost, toxic materials dry.
3. Stores in rotating mixed dry materials can be dried to a low moisture (less than or equal to 0.5%), and good uniformity for different materials.
4. Equipment compact structure, small footprint, easy to operate, and reduce labor intensity, labor-saving.
5. Users can choose limitless speed (~ 10 to 1 / pm) and adjustable speed (rated speed 6-10 switch /), to facilitate drying capacity and adjust to suit different requirements.
The machine applies to medicine, food, chemical and other industries in powder, granular materials vacuum drying and mixing, In particular, the following requirements apply to the materials : the unacceptable high temperature heat-sensitive materials; easy oxidation, a hazardous materials; Solvent recovery needs of toxic gases and materials; Residual demand very low content of volatile material; Crystallization of the shape of the required materials; Mixed full requirements, uniform materials.
|
Project |
Systems |
|
Name |
Units |
100 |
200 |
350 |
500 |
750 |
1000 |
1500 |
2000 |
3000 |
4500 |
|
Total volume |
L |
100 |
200 |
350 |
500 |
750 |
1000 |
1500 |
2000 |
3000 |
4500 |
|
Work volume |
L |
50 |
100 |
175 |
250 |
375 |
500 |
750 |
1000 |
1500 |
2250 |
|
Heating area |
m2 |
1.16 |
1.5 |
2 |
2.63 |
3.5 |
4.61 |
5.58 |
7.5 |
9.6 |
13.8 |
|
Speed |
rpm |
6 |
|
Power |
kw |
0.75 |
1.1 |
1.5 |
1.5 |
2 |
3 |
3 |
4 |
5.5 |
7.5 |
|
High turn |
mm |
1810 |
1910 |
2090 |
2195 |
2500 |
2665 |
2915 |
3055 |
3330 |
4210 |
|
Unit weight |
Kg |
550 |
700 |
900 |
1100 |
1200 |
1300 |
1500 |
2000 |
3000 |
4000 |
|
Tank design pressure |
Mpa |
-0.09～-0.096 |
|
SANDWICH design pressure |
Mpa |
0.3 | |
