Descriptions:
 
 　　     CH type mixer is wide used for mixing powder or wet raw materials, and can make the main and auxiliary raw meterials With different proportion uniform .The places where the raw materials contact are made from stainless steel. The gap between blades is small and there is no dead corner in mixing. At the ends of stirring shaft，there are seal devices. It can prevent from the raw materials rushing cut. It is wide used in pharmaceutical, chemical, foodstuff and so on industries.

Technical parameters :

Type	Matetial capacity(m3)	Matetial feed(kg/ 批)	Overall dismension(mm)	speed(rpm)	admix power(kw)	discharge power(kw)
150	0.15	30	1480×1190×600	24	3	0.55
200	0.2	40	1480×1200×600	24	4	0.55
300	0.3	60	1820×1240×680	24	4	1.5
500	0.5	120	2000×1240×720	20	5.5	2.2
750	0.75	150	2300×1260×800	19	7.5	2.2
1000	1.0	270	2500×1300×860	19	7.5	3
1500	1.5	400	2600×1400×940	14	11	3
2000	2	550	3000×1500×1160	12	11	4
2500	2.5	630	3500×1620×1250	12	15	5.5
3000	3	750	3800×1780×1500	10	18.5	5.5