Applications
Foreign-cycle enrichment is the pot at home and abroad to create Botanicals extract more satisfied with the equipment, But not create 1.4 proportion of the medicine designed to extract, which has high efficiency and less loss extract, defoamer good, Scaling heating pipe is not easy, low installation height of the advantages of less investment. Uses : Chinese water for juice, alcohol liquid medicine, juice and other liquids in a vacuum and atmospheric concentration enrichment. Structural principle : evaporators cycle adapted from that in the next cycle of the butterfly valve plus one, Evaporation under the Cone Room for two steam jacket; out of the heater and evaporator located bypass pipe, It has, in fact, cycling and jacket with their respective advantages. Concentrated at the beginning of the use of efficient, defoamer good cycle outside evaporator remove most moisture, Finally Jacket heating concentration 1.4% share of the medicine extract. Chinese medicine manufacturers Concentration Solution loss, the equipment can be used to save steam and cooling water by half, Combined with the characteristics of enrichment pot, the proportion of 1.4 Preparation of the extract applies to many Chinese Herbs enrichment, Festival two years of drug-effective equipment investment can be recovered, the equipment from an outside cycle efficiency concentrator, 2 - modular concentrator and condenser components. Performance features : simple structure reasonable, advanced technology, they need not flow configuration paste cans and condensate water traps, and the three-concentrator, the integrated technical indicators, and the highest evaporation ointment low temperature 15 ° C, to ensure the quality of medicines; YMJYE losses low 50%; only a 16% energy saving. Combined with the characteristics of enrichment pot can produce 1.4 proportion of the medicine extract. Main technical parameters : 1, evaporation capacity (kg / h) :600-1000 2. Steam pressure (MPa) 0.05-0.09 3, steam temperature (° C) an effective 80, 2-55? , steam consumption (kg / h) :360-600
Technical Parameters
|
|
B-1型 |
B-2型 |
B-3型 |
B-5型 |
B-10型 |
|
蒸发水量变kg/h |
80 |
180 |
260 |
440 |
900 |
|
列管加热面积 |
1.1 |
2.3 |
3.1 |
5.2 |
10.4 |
|
夹套加热面积(M2) |
0.3 |
0.5 |
0.5 |
1.1 |
1.4 |
|
蒸汽压力MPa |
<0.1 |
<0.1 |
<0.1 |
<0.1 |
<0.1 |
|
设备高度M |
2.4 |
2.8 |
3.0 |
3.2 |
4.0 | |
