DWP is a jet-flow drying belt types, hot air flow to slit or hole next beam down or spit while on the conveyor belt material, As gas jet with up to 15 m / s and above, the convective heat of the very thin membrane heat, heat transfer coefficient, dry faster. The type of equipment used in airtight material, the jet flow is still above the return of the above, the following emission of gases still back out below, participate in recycling. Permeability of coating materials, such as cloth drying, and it also applies to flake materials and some special materials dry. If a two-way flow injection, sheet materials such as dried small deformation. Spray Drying can be used steam heat, electricity, hot stove and fuel flue gas.

　　Spray drying wind belt specialized equipment, such as pulp drying generally M or S-shape of the multi-storey structure. Pulp is single-mode. The former transport of suspended blue type, the latter for network-belt conveyor. And hot air temperature, gas circulation volume, humidity, wind speed and wind beam for other forms of common materials, much practical difference.
User advice, I quickly plant engineers will detail the rational design of the program and is willing to work with a user. urging our equipment better performance and better efficiency.

Name \ parameters \ serial number		DWP-Ⅰ	DWP-Ⅱ	DWP-Ⅲ
Bandwidth m		1.6
Drying long m		8
Shop thick material mm		10-80
Temperature oC		50-120
Steam pressure Mpa		0.2-0.6
Heat transfer area m2		330	296	259
Drying time h		0.2-1.2
Fan quantity		3	2	2
Chuan motive power Kw		0.75
Fan Power KW		7.5*3*2	7.5 3	7.5 3
Dimensions		10*2.1*3.6